Weighing edible oil filling machines are the most common in the market, and some malfunctions may occur during use. Fault analysis has become a priority concern for enterprises. Below, we will provide you with some of the faults and analysis that have occurred during the production process of edible oil quantitative filling machines, and offer our best assistance to customers.
1. After the controller is started, the oil nozzle releases oil but the controller does not measure (runs less)
Troubleshooting:
Check if the signal line is damaged or disconnected. If it is disconnected, simply connect it according to the original color or replace it;
Check if the platinum resistor is damaged. If it is damaged, please replace it;
If the temperature displays above 120 ℃, it indicates that the temperature signal line is short circuited or disconnected;
If the temperature displays as -20 ℃, it indicates that the temperature signal line is connected incorrectly. Please reconnect it.
If the temperature display is unstable, it indicates that there is a problem with the platinum resistor. Please replace it.
2. The filling nozzle does not move upwards
Check if the air compressor outlet switch is turned on and if the air pressure is normal.
3. Shut down the concept, the oil nozzle doesn't go down
Check if the air compressor outlet switch is turned on and if the air pressure is normal.
4. Unstable oil output during filling, fluctuating between high and low levels
Clean the filter
Weighing type edible oil filling machines generally use flow meter type filling. Flow meter type filling is a computer that automatically tracks changes in oil temperature and density to adjust the oil delivery amount at any time, reducing errors in oil delivery quality caused by temperature and density changes, and achieving high measurement accuracy.
According to the degree of automation, it can be divided into semi-automatic filling machines and fully automatic filling machines, both of which adopt two measuring methods: fixed capacity filling and fixed quality filling
Semi automatic filling machines generally have foot switches: quantitative → bucket placement → foot start → nozzle dropping → filling → nozzle lifting → vacuum suction → placing a set of empty buckets.
Process of fully automatic filling machine: manual quantification → manual bottle placement → automatic sensing of bottle mouth position and oil nozzle falling → automatic filling → automatic conveying → manual cap placement → automatic capping → automatic coding → conveyor belt warehouse.
The weighing type edible oil filling machine only requires manual bottle and cap placement during this process, and of course, it can also achieve unmanned filling.